IKEA ASKVOLL: spare parts, screws and repairs

You disassembled the ASKVOLL for a move. Upon reassembly, a metal plate or a screw is missing. The bed is unusable. This is the most frequent problem with this model. This guide provides the exact references, pitfalls to avoid, and documented solutions.

---

Which ASKVOLL model do you have?

The ASKVOLL comes in two formats, both in white melamine panel.

Model	Mattress dimensions
Full	140 x 200 cm
Queen	160 x 200 cm

Both versions share the same hardware and the same assembly logic. The LEIRSUND slatted base is sold separately — it is not included in the frame.

The article number is inscribed under the frame or inside a side panel. This is the reliable identifier for ordering an IKEA ASKVOLL spare part.

---

The critical parts of the ASKVOLL

Mounting plates: the connection that absorbs everything

The mounting plates connect the headboard, footboard and side rails. On such a streamlined design, these fittings bear all the mechanical stresses. They disappear or deform, especially during moves.

The common reference is #116791 (galvanized steel, recent generation). It is shared with SONGESAND, TRYSIL, BRIMNES and HASSELVIKA. This is the most available version from third-party suppliers.

An earlier generation exists under reference #139301. These two plates are not interchangeable. Compare the shape with your original plate before ordering.

Fixing screws

The screws associated with the plates bear the reference #110789. Common to several IKEA beds, they are generally included in replacement kits. Verify that the screw pitch corresponds before assembly.

Reference #105307 is a variant found on some batches. In case of doubt, bring an original screw to a hardware store for identification.

LEIRSUND base

The LEIRSUND slatted base is sold separately. Batch numbers have varied over the years. Before any replacement, measure the internal width of your frame: it must correspond exactly to the length of the slats.

A base that is incorrectly sized will warp the frame. This weakens the fixings and creates creaking.

---

Common problems with the ASKVOLL

Head and footboard weakened after disassembly

This is the main weakness of this model. Each assembly/disassembly cycle stresses the same fixing points. After two or three passes, the melamine around the holes compresses. The connection loses its rigidity.

The rule to limit damage: never fully tighten the screws during the first positioning. Align all the elements, check the flatness, then tighten gradually in a cross pattern. Brutal tightening on a misaligned panel crushes the fibers irreversibly.

If a panel is already damaged, threaded metal inserts (available in hardware stores) can consolidate the fixing point before reassembling the plate.

Frame that creaks

Creaking rarely comes from the plates. The first suspects are the contact points between the LEIRSUND slats and their supports. Felt washers glued to the friction points solve the majority of cases.

If the creaking persists: check the tightening of the plates. A slight play is enough to create a repetitive movement under the weight of the mattress.

The instructions are nowhere to be found

The ASKVOLL is an old model. Paper instructions are often lost. It is available on the IKEA product page and on manuall.fr. Download it and keep it. The order of assembly of the plates is counterintuitive without a diagram.

---

Compatibility with other IKEA beds

The ASKVOLL shares its hardware with several IKEA models.

Compatible IKEA model	Shared parts
SONGESAND	Plates #116791 / #139301, screws #110789
TRYSIL	Plates #116791 / #139301, screws #110789
BRIMNES	Plates #116791 / #139301
HASSELVIKA	Plates #116791 / #139301

A plate listed for a SONGESAND or BRIMNES works on ASKVOLL in the vast majority of cases. Check the generation before ordering.

---

FAQ

Where can I find the ASKVOLL assembly instructions?
On the IKEA product page, in the "Assembly instructions" section. Also on manuall.fr. A single instruction manual covers both formats (140 and 160 cm).

Is the ASKVOLL mounting plate #116791 compatible with an old frame?
In the vast majority of cases, yes. If your frame is prior to 2015, compare the shape of your original plate with the photos of third-party suppliers before ordering.

Is the LEIRSUND base the only one compatible with the ASKVOLL?
It is the base recommended by IKEA. Other slatted bases may work if the internal dimensions correspond. Measure before buying.

The frame creaks after reassembly: what should I check first?
Slats and supports first. Then tightening of the plates. If the creaking persists: check the fixing holes for play in the melamine.

Are the screws for the ASKVOLL bed available at IKEA?
Yes, via the spare parts service online or in store, with the complete article number. Third-party suppliers also offer compatible kits, often available more quickly.